CRANKSHAFT AND CONNECTING RODS
CRANKCASE
Order
Job name/Part name
Removing the crankshaft assembly
Engine assembly
Cylinder head
Cylinder and piston
Clutch assembly
AC magneto and starter clutch
Shift shaft
Oil pump assembly
1
Oil level gauge
2
Neutral switch
3
Shift shaft stopper plate
4
Crankcase (right)
5
Dowel pins
6
Relief valve
CRANKSHAFT AND CONNECTING RODS
10 Nm (1.0 m•kg)
Q'ty
1
1
1
1
3
1
4-59
ENG
38,5 Nm (3.85 m•kg)
20 Nm (2.0 m•kg)
Remarks
Remove the parts in the order listed.
Refer to "ENGINE REMOVAL".
Refer to "CYLINDER HEADS".
Refer to "CYLINDERS AND PISTONS".
Refer to "CLUTCH".
Refer to "GENERATOR AND STARTER
CLUTCH".
Refer to "SHIFT SHAFT".
Refer to "OIL PUMP".
Refer to "ASSEMBLING THE
CRANKCASE".
Refer to "DISASSEMBLING/
ASSEMBLING THE CRANKCASE".
For installation, reverse the removal
procedure.