Using Push To Talk Service - Cisco 7921G User Manual

Using Push to Talk Service

The Push to Talk service provides immediate communication (similar to a two-way radio) with
members of your organization. Your system administrator must set up the Push to Talk service by using
an XML application, and then you must subscribe to this service.
If you want to... Then...
Access Push To See
Talk service CallManager 4.1 or later.
See
Unified Communications Manager 5.0 or later.
Use Push to Talk 1. Choose
service
2. Use the
Note
58
Subscribing to Phone Services, page 80
Setting Up Phone Services on the Web, page 86
(Services) > Push to Talk (name can vary).
Push to Talk service is active when the
button to start and end a transmission depending on how your
service is configured. You can also use the Talk and Stop softkeys to toggle
between transmitting and listening.
Your system administrator will provide detailed information about how to use
your Push to Talk service.
for systems using Cisco Unified
for systems using Cisco
icon displays.
OL-15163-01