Cisco 7921G User Manual page 101

If you want to...
Add a new remote
destination
Cisco Unified Wireless IP Phone 7921G for Cisco Unified Communications Manager 4.3, 5.1, 6.0 and Later
Then do this after you log in...
1. Choose User Options > Mobility Settings > Remote Destinations.
Select the device from the Name drop-down list box.
2.
Click Remote Destinations.
3.
4. Click Add New.
5. Enter the following information:
Name—Enter a name for the cellular (or other) phone.
–
Destination Number—Enter your cellular phone number.
–
Answer Too Soon Timer—Enter the amount of time before you can pick
–
up a call on the remote destination (in milliseconds).
Answer Too Late Timer—Enter the amount of time after which it is too
–
late to pick up a call on the remote destination (in milliseconds).
Delay Before Ringing Timer—Enter the amount of time before the call
–
rings on the remote destination (in milliseconds).
– Remote Destination Profile—Select a remote destination profile, which
contains the settings that apply to all of your remote destinations.
– Allowed Access List—Select a phone number or rule that allows your
cellular phone to ring when a call comes in to your wireless IP phone.
You can select an allowed access list or blocked access list, but not both.
Blocked Access List—Select a phone number or rule for which your
–
cellular phone does not ring when a call comes in to your wireless IP
phone. You can select an allowed access list or blocked access list, but
not both.
Mobile Phone—Select to allow your cellular phone can accept a call
–
sent from your wireless IP phone.
Enable Mobile Connect—Select to allow your cellular phone to ring
–
simultaneously with your wireless IP phone.
Smart Client Installed—Select to indicate that the remote destination
–
you are setting up is a smartphone.
6. Click Save.
Accessing Your User Options Web Pages
93