Cisco 7921G User Manual page 65

If you want to...
Turn on Mobile Connect
from your cellular phone
Make a call from your
cellular phone
Turn off Mobile Connect
from your cellular phone
Tips
• When calling Mobile Voice Access, you need to enter the number you are calling from in addition
to the PIN if any of the following are true:
The number you are calling from is not one of your remote destinations.
–
The number is blocked by you or your carrier (shown as "Unknown Number").
–
The number is not accurately matched in the Cisco Unified Communications Manager
–
database; for example, if your number is 510-666-9999, but it is listed as 666-9999 in the
database, or your number is 408-999-6666, but it is entered as 1-408-999-6666 in the
database.
• If you incorrectly enter any requested information (such as cellular phone number or PIN) three
times in a row, the Mobile Voice Access call disconnects, and you are locked out for a period of
time. Contact your system administrator if you need assistance.
Cisco Unified Wireless IP Phone 7921G for Cisco Unified Communications Manager 4.3, 5.1, 6.0 and Later
Then...
1. Dial your assigned Mobile Voice access number.
2. Enter your cellular phone number (if requested) and PIN.
3. Press 2 to enable Mobile Connect.
4. Choose whether to turn Mobile Connect on for all configured
phones or just one:
All phones—Enter 2.
–
One phone—Enter 1 and enter the number you want to add as
–
a remote destination, followed by #.
See Placing a Call—Additional Options, page
1. Dial your assigned Mobile Voice access number.
2. Enter your cellular phone number (if requested) and PIN.
3. Press 3 to disable Mobile Connect.
4. Choose whether to turn Mobile Connect off for all configured
phones or just one:
All phones—Enter 2.
–
One phone—Enter 1 and enter the number you want to
–
remove as a remote destination, followed by #.
Advanced Call Handling
29.
57