Forwarding All Calls To Another Number; Making Conference Calls; Understanding Standard Conference Calls; Starting And Joining A Standard Conference - Cisco 7961G Phone Manual

Tip
You cannot use Transfer to redirect a call on hold. Press Resume to remove the call from hold before
transferring it.

Forwarding All Calls to Another Number

You can use Call Forward All to redirect incoming calls from your phone to another number.
If you want to...
Set up call forwarding on
your primary line
Cancel call forwarding on
your primary line
Verify that call forwarding is
enabled on your primary line
Forward all calls directly to
voicemail
Note: When call forwarding is enabled for any line other than the primary line, your phone does not
provide you with any confirmation that calls are being forwarded.
Tips
•
You must enter the call forward target number exactly as you would dial it from your phone.
For example, enter an access code or the area code, if necessary.
•
You must configure this feature per line; if a call reaches you on a line where call forwarding is
not enabled, the call will ring as usual.

Making Conference Calls

Your Cisco Unified IP Phone allows you to join up to four parties into one telephone conversation,
creating a conference call.
Understanding Standard (ad hoc) Conference Calls
You can create a standard conference in different ways, depending on your needs and the softkeys
available on your phone:
•
Confrn—Use this softkey to establish a standard conference by calling each participant.
•
Join—Use this softkey to establish a standard conference by joining several calls already on
one line.

Starting and Joining a Standard Conference

A standard (ad hoc) conference allows up to four people to participate in a single call.
Then...
Press CFwdALL and enter a target phone number.
Press CFwdALL.
Look for:
• The call forward icon above the primary phone number:
• The call forwarding target number in the status line.
Press CFwdALL and enter extension 3620, the ext for voicemail
for Cisco phones.
14
.