Starting Or Joining A Meet-Me Conference Call; Placing Or Receiving Intercom Calls - Cisco 7921G User Manual

Starting or Joining a Meet-Me Conference Call

Meet-Me conferencing allows you to start (initiate) or join a conference by dialing the conference
number.
If you want to...
Start a Meet-Me conference 1. Obtain a Meet-Me phone number from your system administrator.
Participate in a Meet-Me
conference
End a Meet-Me conference
Tip
If you call a secure Meet-Me conference number from a non-secure phone, your phone displays the
message, "Device Not Authorized." For more information, see
page 53.

Placing or Receiving Intercom Calls

You can place an intercom call to a target phone that auto-answers the call in speakerphone mode with
mute activated. The one-way intercom call allows you to deliver a short message to the recipient. If
the recipient's handset or headset is in use, the audio is sent to the device in use. Any current call
activity that your recipient is engaged in continues simultaneously.
42
Then...
2. Distribute the number to participants.
3. When you are ready to start the meeting, choose Options >
MeetMe.
4. Dial the Meet-Me conference number.
5. Press the .
Participants can now join the conference by dialing in.
Note Participants hear a busy tone if they call the conference before the
initiator has joined. In this case, participants must call back.
1. Dial the Meet-Me conference number (provided by the conference
initiator).
2. Press the .
Note You will hear a busy tone if you call the conference before the
initiator has joined. In this case, try your call again.
All participants must hang up.
The conference does not automatically end when the conference
initiator disconnects.
Making and Receiving Secure Calls,
OL-10806-02