Forwarding All Calls To Another Number - Cisco 7970 Series Phone Manual

Forwarding All Calls to Another Number

You can use Call Forward All to redirect incoming calls from your phone to another number.
If you want to...
Set up call forwarding on your
primary line
Cancel call forwarding on
your primary line
Verify that call forwarding is
enabled on your primary line
Set up or cancel call
forwarding remotely, or for a
non-primary line
Note When call forwarding is enabled for any line other than the primary line, your phone does not
provide you with confirmation that calls are being forwarded. Instead, you must confirm your
settings in the User Options web pages. See
page 52.
Tips
• You must enter the call forward target number exactly as you would dial it from your phone. For
example, enter an access code or the area code, if necessary.
• You can forward your calls to a traditional analog phone or to another IP phone, although your
system administrator might restrict the call forwarding feature to numbers within your company.
• You must configure this feature per line; if a call reaches you on a line where call forwarding is
not enabled, the call will ring as usual.
30
Then...
Press CFwdALL and enter a target phone number.
Press CFwdALL.
Look for:
• The call forward icon above the primary phone number:
• The call forward target number in the status line.
1. Log in to your User Options web pages and select a device.
2. Choose Forward all calls...
3. Choose your primary line or any secondary line.
4. Choose to redirect calls to voice messaging or to another
number.
Logging In to the User Options Web Pages,
.
OL-10776-01