Cisco 7921G User Manual page 100

If you want to...
Create an access list 1. Choose User Options > Mobility Settings > Access Lists.
Add members to an
access list.
92
Then do this after you log in...
2. Click Add New.
Enter the following information:
3.
Name—Identifies the access list.
–
Description—Describes the access list.
–
4. Choose one of these options:
Blocked Access List—Creates list for numbers to be blocked
–
Allowed Access List—Creates list for numbers that will be permitted
–
5. Click Save.
1. Create an access list.
Click Add Member to add phone numbers or filters to the list.
2.
Select an option from the Filter Mask drop-down list box. You can filter a
3.
directory number, calls with restricted caller ID (Not Available), or calls
with anonymous caller ID (Private).
4. If you select a directory number from the Filter Mask drop-down list box,
enter a phone number or filter in the DN Mask field. You can use the
following wild cards to define a filter:
X (upper or lower case)—Matches a single digit. For example,
–
408555123X matches any number between 4085551230 and
4085551239.
!—Matches any number of digits. For example, 408! matches any
–
number starts with 408.
#—Used as a single digit for exact match.
–
To add this member to the access list, click Save.
5.
To save the access list, click Save.
6.
OL-15163-01