Setting Username And Passwords; Entering And Editing Text - Cisco 7921G User Manual

Unified wireless ip phone 7921g guide for cisco unified communications manager 4.3, 5.1, 6.0 and later
Hide thumbs Also See for 7921G:
Table of Contents

Advertisement

Tip
Your idle phone screen can turn off after a time interval. To alert you that the phone is still powered
on and connected to the wireless network when using battery power, the indicator light blinks green
every two seconds.

Setting Username and Passwords

When powering on your phone for the first time, in some networks, you might need to set your
username and password to access the wireless network. Ask your system administrator for assistance.
If you want to...
Set username and
password

Entering and Editing Text

You can enter characters, numbers, and special characters for passwords. When you press a numeric
key on the keypad, a text bubble shows all the characters and symbols that this key controls. Each
press moves to another character option.
If you want to...
Enter characters
Enter numbers
12
Then...
1. Choose
2. Highlight the current profile name (with
Note
icon displays indicating that this screen is locked. For assistance,
contact your system administrator.
3. Highlight WLAN Configuration and press View.
4. Scroll to Username or Password and press
5. Using the keypad, enter your username or password in the New
Username or New Password field.
For assistance, see
Note
You can use up to 32 alphanumeric characters for the EAP/LEAP
password.
6. To confirm the changes, choose Options > Save.
7. To return to the main screen, press
Then...
Press the number key until you highlight the character (lower or upper
case) that you want to enter.
Press the number key and locate the number that you want to enter.
(Settings) > Network Profiles.
Entering and Editing Text, page
) and press View.
.
12.
(red button).
OL-15163-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents