Periodical Sending - Beward N 13102 Operation User's Manual

IMPORTANT:
When you configuring this menu, be aware that these parameters are applied to the other camera
functions, for example to recording to network storage, FTP, etc.
Recording capacity: shows maximum record time for the corresponding events and is
provided for informational purposes only.
 Pre-alarm period: maximum record time before the connection was down.
 Post-alarm period: maximum record time after connection was down.
Recording time: allows you to set a record time for the corresponding events.
 Pre-alarm period: record time before connection was down.
 Post-alarm period: record time after connection was down.
IMPORTANT:
When the [Alarm buffer] option is enabled, maximum length of transferred video corresponds to pre- and
post buffer size.
Recording time: select the length (from 5 to 60 seconds) for the file recorded after an
alarm event occurred. The camera records in avi format.
Effective period: allows you to set a period for recording to a memory card when an alarm
is triggered. The following options are available:
 Always: select this option for continuous recording to a memory card.
 Schedule: select this option for scheduled recording to a memory card. To configure this
option, click the [Schedule] button or go to SETTING – Events – Schedule. See
paragraph 9.7 for details.
NOTE:
Click [ОК] to save changes. Otherwise, the changes may not be saved.

9.4.3. Periodical Sending

This menu allows you to configure scheduled recording to a memory card.
Select the option for [On] to enable scheduled recording (Pic. 9.24) or select the option for
[Off] to disable it.
NOTE:
All periodical records in the IPCamera folder located in the [Period] folder.
N13102 Operations User Manual
Chapter 9. SETTING: Events
74