IMPORTANT:
To use audio detection, you need to enable audio in SETTING – Camera – General.
IMPORTANT:
When you configuring this menu, be aware that these parameters are applied to the other camera
functions, for example to recording to network storage, FTP, etc.
9.7. Schedule
This section allows you to specify a schedule for the functions mentioned before. You can
specify a schedule for each day of the week or apply it for a whole week by checking the [Use the
same time schedule every day] box (Pic. 9.28).
Schedule selection: allows you to specify a schedule for a certain event. The following
events are available: [FTP – Alarm], [FTP – Periodical], [E-mail (SMTP) – Alarm], [E-mail
(SMTP) – Periodical], [Record – Alarm], [Record – Periodical], [Memory card – Alarm],
[Memory card – Periodical].
Start time, End time: allows you to specify a time interval. The first field is for selecting an
hour (00 to 23); the second field is for selecting a minute (00 to 55 in increments of 5).
Days of the week area: the following options are available for each day of the week:
Time interval: this is a drop-down list containing time intervals that were specified for
each day of the week. If no interval is specified, the drop-down list will be empty.
N13102 Operations User Manual
Pic. 9.28
Chapter 9. SETTING: Events
80