Sequence number: adds a six-digit number. User can click the [Clear] button to reset
the sequence number anytime. When user clicks the [Clear] button it resets the
sequence number and starts it from 000001.
Alarm: allows you to select an event that triggers file transfer to FTP:
Motion detection: enables motion detection triggered file transfer. To configure this
option, click the [Motion detection] button or go to SETTING – Advanced – Motion
detection. See paragraph 7.5 for details.
Effective period: allows you to set a period for uploading files to FTP. The following
options are available:
Always: select this option for continuous uploading of files.
Schedule: select this option for scheduled uploading of files. To configure this option,
click the [Schedule] button or go to SETTING – Advanced – Schedule. See paragraph
7.4 for detailed information.
NOTE:
Click [ОК] to save changes. Otherwise, the changes may not be saved.
7.1.3. Periodical Sending
This section allows you to configure schedule to upload files to FTP. Select the option for
[On] to enable this option (Pic. 7.5).
N1000 Operations User Manual
Pic. 7.5
Chapter 7. SETTING: Advanced
55