Profile 2 - Beward N 13102 Operation User's Manual

NOTE:
See the Appendix A for the detailed information about the [Fixed quality]

Fixed bitrate: allows you to set the fixed bitrate. The following values are available: 64,
128, 256, 384, 512, 768 kbps and 1, 1.5, 2, 3, 4, 5, 6 Mbps.

7.3. Profile 2

This section contains the camera stream settings that are applied to the Profile 2. It is
possible to select between H.264, MJPEG, and 3GPP encoding (Pic. 7.6).
Viewer authentication: if this option is enabled, a user should enter user name and
password to view camera image via third-party players such as Quick Time, VLC, etc.
Streaming: this item allows selecting the stream encoding type that is used in the Profile 2.
In this profile, it is impossible to select between H.264, MJPEG, and 3GPP encoding.
Image size: allows you to set the following image resolution: 1280x1024, 1280x720,
640x480 or 320x240 for H.264 and MJPEG encoding; 320x240 and 160x120 for 3GPP streaming.
Frame rate: allows you to set a frequency at which the camera produces unique
consecutive images per second for each encoding type. The following values are available for
H.264 and MJPEG: 1, 2, 3, 4, 5, 7, 10, 15, 20, 25 and 30 frames per second depending on image
resolution. When 1280х1024 or 1280х720 resolution is set, the following frame rate values are
available: 1, 2, 3, 4, 5, 7, 10, 15. When 640х480 or 320х240 resolution is set, the following frame
rate values are available: 1, 2, 3, 4, 5, 7, 10, 15, 20, 25, 30. When 3GPP is used, only 5 and 10 fps
values are available.
NOTE:
If you want to use a frame rate value higher that 15, you need to set a resolution not higher than 640х480 in
the Profile 1 and the Profile 2.
N13102 Operations User Manual
Pic. 7.6
Chapter 7. SETTING: Camera
.
35