Beward N 13102 Operation User's Manual page 66

IMPORTANT:
When motion or audio detection triggers, video files length depends on the value specified in the
[Recording time] menu.
 Network link down: when this option is enabled, the camera starts recording to network
attached storage when a network error occurs. When the connection is lost, the camera
sends the records made before and after the connection was lost to the temporary
buffer. After the connection is up, the camera sends these files to network attached
storage. To configure this option, click the [Alarm buffer] button (appears if the
[Network link down] box is checked). (Pic. 9.16).
NOTE:
Duration of sent video files is 5 seconds, however the file size is 2 MB maximum. Therefore video file
duration may be less than 5 seconds even if user specifies the value of 5 seconds in the [Alarm buffer]
menu.
IMPORTANT:
When you configuring this menu, be aware that these parameters are applied to the other camera
functions, for example to recording to network storage, FTP, etc.
Recording capacity: shows maximum record time for the corresponding events and is
provided for informational purposes only.
 Pre-alarm period: maximum record time before the connection was down.
 Post-alarm period: maximum record time after connection was down.
Recording time: allows you to set a record time for the corresponding events.
 Pre-alarm period: record time before connection was down.
 Post-alarm period: record time after connection was down.
Recording time: select the length (from 5 to 60 seconds) for the file recorded after an
alarm event occurred. The camera records in avi format.
N13102 Operations User Manual
Pic. 9.16
Chapter 9. SETTING: Events
65