Beward N 13102 Operation User's Manual page 44

IP address: IP address from PPPoE server (assigned by server).
User ID: type a username for PPPoE connection. The maximum length is 64 characters
(assigned by your Internet service provider or PPPoE provider).
Password: type a password for PPPoE connection. The maximum length is 32 (assigned
by your Internet service provider or PPPoE provider).
Re-type password: re-type the entered password to avoid mistakes in password
assignment.
Obtain DNS server address automatically: select this option to obtain a DNS address
automatically.
Use the following DNS server address: select this option to type DNS servers' addresses
manually.
 Primary DNS server: type the primary DNS server IP address.
 Secondary DNS server: type the secondary DNS server IP address.
IMPORTANT:
You must restart the camera for the changes to take effect. To do so, go to SETTING – System –
Initialize.
IMPORTANT:
After a PPPoE connection is established, the IP address you specified in SETTING – Network –
Information is unavailable and you need to type the IP address assigned by PPPoE server to access the
camera (SETTING – Network – PPPoE).
Use the option for [IP notification] to check the IP address assigned after PPPoE connection is
established (see paragraph 8.5. for details).
N13102 Operations User Manual
Pic. 8.3
Chapter 8. SETTING: Network
43