Memory Card; General - Beward N 13102 Operation User's Manual

9.4. Memory Card

This menu allows you to configure recording to a memory card. When this function is
enabled, the camera can record files continuously, with a certain time interval, when an event
occurs, or it is possible to save files to a memory card when the network connection is failed or
network storage or FTP is unavailable. This menu contains the following sections: [General],
[Alarm sending], [Periodical sending], and [Backup] (Pic. 9.18).

9.4.1. General

Select the option for [On] to enable recording to a memory card or select the option for
[Off] to disable it (Pic. 9.19).
After inserting a memory card, you need to format. Make sure that [Memory card] item is
set to [Off].
Memory card format may take several minutes and requires camera restart.
If memory card is unavailable or there are errors in memory card operation, the indicator on
camera's casing will blink red.
After being formatted, memory card is ready to use. Switch the [Memory card] item to
[On]. Click the [OK] button to apply the settings.
IMPORTANT:
Insert a memory card only when the camera is turned off. Otherwise this may cause the camera to reboot.
N13102 Operations User Manual
Pic. 9.18
Chapter 9. SETTING: Events
68