Beward N 13102 Operation User's Manual page 74

digits, the hour as 2 digits, the minute as 2 digits, the second as 2 digits. Totally, this
adds a fourteen-digit suffix to the file name.
 Sequence number: adds a six-digit number. User can click the [Clear] button to reset
the sequence number anytime. When user clicks the [Clear] button it resets the
sequence number and starts it from 000001.
Alarm: allows you to select an event that triggers recording to network attached storage:
 Motion detection: the camera starts recording to a memory card when motion detection
is triggered. To configure this option, click the [Motion detection] button (appears if the
[Motion detection] box is checked) or go to SETTING – Events – Motion detection.
See paragraph 9.5 for details.
 Audio detection: the camera starts recording to a memory card when audio detection is
triggered. To configure this option, click the [Audio detection] button (appears if the
[Audio detection] box is checked) or go to SETTING – Events – Audio detection. See
paragraph 9.6 for details.
IMPORTANT:
When motion or audio detection triggers, video files length depends on the value specified in the
[Recording time] menu.
 Network link down: when this option is enabled, the camera starts recording to a
memory card when a network error occurs. When the connection is lost, the camera
sends the records made before and after the connection lost to the temporary buffer.
After the connection is up, the camera sends these files to network attached storage. To
configure this option, click the [Alarm buffer] button (appears if the [Network link
down] box is checked). (Pic. 9.23).
N13102 Operations User Manual
Pic. 9.23
Chapter 9. SETTING: Events
73