Ip Notification - Beward N 13102 Operation User's Manual

8.5. IP notification

This section allows you to configure your camera so that it will send e-mails after network
settings were changed (Pic. 8.6).
Select the option for [On] and click OK to enable this function. After you save the changes,
the following settings will be available:
Notify type: select a connection type if you want to be notified when it is changed: [DHCP],
[Static IP], or [PPPoE].
If any of these types is selected, a message containing data from the [Message] field will
be sent to the specified e-mail address.
SMTP server name: type the SMTP server IP address or name (64 characters maximum).
SMTP server port: type the SMTP server port number. The default value is 25.
SSL: check this box if the provider requires SSL communications.
Authentication: select an authentication type to send e-mails.
 Off: no authentication is required.
 On: authentication is required. You can select [SMTP] or [POP before SMTP].
POP server name: this item is displayed when the [POP before SMTP] option is selected.
The POP server name is used for authorization (64 characters maximum).
User name: type a username to access the mail server (64 characters maximum).
Password: type a password to access the mail server (64 characters maximum).
N13102 Operations User Manual
Pic. 8.6
Chapter 8. SETTING: Network
46