Beward N 13102 Operation User's Manual page 35

Viewer authentication: if this option is enabled, a user should enter user name and
password to view camera image via third-party players such as Quick Time, VLC, etc.
Streaming: this item displays the stream encoding type that is used in the Profile 1. In this
profile, it is impossible to change the encoding type and it is set to its default value (MPEG-4).
However, it is possible to select other encoding type in the Profile 2 section.
Image size: allows you to set the following image resolution: 1280x1024, 1280x720,
640x480 or 320x240. Sets image resolution for connections via software.
Frame rate: allows you to set streaming rate in frames per second for MPEG-4. The
following values are available: 2, 3, 4, 5, 7, 10, 15, 20, 25 and 30 frames per second depending on
image resolution. When 1280х1024 or 1280х720 resolution is set, the following frame rate values
are available: 2, 3, 4, 5, 7, 10, 15. When 640х480 or 320х240 resolution is set, the following frame
rate values are available: 2, 3, 4, 5, 7, 10, 15, 20, 25, 30.
NOTE:
If you want to use a frame rate value higher that 15, you need to set a resolution not higher than 640х480 in
the Profile 1 and the Profile 2.
Quality: allows you to set the video stream quality. The default value is the [Fixed quality].
 Auto: the camera automatically adjusts image quality and frame rate depending on
bandwidth. If the bandwidth decreases, the camera automatically changes image quality
but keeps the frame rate constant.
 Fixed quality: this option allows you to select any of the following quality levels:
[Excellent], [Detailed], [Good], [Standard], and [Medium].
N13102 Operations User Manual
Pic. 7.5
Chapter 7. SETTING: Camera
34