General - Beward N 13102 Operation User's Manual

9.2.1. General

Select the option for [On] to enable e-mail sending or select the option for [Off] to disable it
(Pic. 9.8).
SMTP server name: type the SMTP server IP address or name (64 characters maximum).
SMTP server port: type the SMTP server port number. The default value is 25.
SSL: check this box if the provider requires SSL communications.
Authentication: select an authentication type to send e-mails.
 Off: no authentication is required.
 On: authentication is required. You can select [SMTP] or [POP before SMTP].
POP server name: this item is displayed when the [POP before SMTP] option is selected.
The POP server name is used for authorization (64 characters maximum).
User name: type a username to access the mail server (64 characters maximum).
Password: type a password to access the mail server (64 characters maximum).
Recipient e-mail address: type the receiver's e-mail address (64 characters maximum).
You can type up several e-mail addresses separating them by using a semicolon [;].
Administrator e-mail address: type the sender's e-mail address (64 characters
maximum).
Attached file type: select a file type you want to transfer via e-mail. The following options
are available:
 Snapshot: select this option to transfer JPEG images via e-mail.
 Video clip: select this option to transfer AVI video via e-mail.
Subject: type the e-mail subject (64 characters maximum) into this box.
N13102 Operations User Manual
Pic. 9.8
Chapter 9. SETTING: Events
55