The specificity of the detector different types operation is the same as for the motion
detector.
NOTE:
To save changes press the [Save] button, to cancel changes press the [Cancel] button.
11.2.1.3. Tampering Detection
Tampering Detection: the action is executed when tampering detector triggers off (Pic.
11.31).
When selecting this type the following items are available:
Set min time interval between triggers: when this time interval ends, the alarm event can
be restarted.
Please Configure Tampering Detection: a link which allows you to open motion detection
configuration window.
11.2.1.4. Periodical
Periodical: the action is executed periodically according to specified time period (Pic.
11.32).
When selecting this type the following settings are available.
Trigger Every Other: specify a time interval in hours and minutes. The action will be
repeated by the end of this interval.
11.2.1.5. On boot
On boot: the action is executed when the camera is loaded after turning on. By selecting
this event type you can notice the number of camera reboots.
N13201 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.31
Pic. 11.32
92