Beward N 13102 Operation User's Manual page 26

Current date/time: displays the current date and time of the IP Camera.
IMPORTANT:
After you restart the camera, its date and time will be reset to their default values: 1970-01-01 00:00:00. It
is recommended to use the [Synchronize with NTP] option to set the correct date and time.
PC clock: displays date and time on a computer, which is used to connect to the camera
(client computer)
Date/Time format: allows you to select date/time format.
Adjust: allows you to select how to set the camera date and time.
 Keep current setting: leaves the current date and time as they are.
 Synchronize with PC: use the same date and time as on a computer, which is used to
connect to the camera.
 Manual setting: select this mode to adjust the camera the date and time manually.
 Synchronize with NTP: allows you to synchronize your camera clock with an NTP
server (Network Time Protocol) located in the Internet (e.g. time.windows.com,
time.nist.gov, etc). Select an NTP server name and a time update interval (by default,
camera clock is typically updated once an hour).
NOTE:
By default, the camera synchronizes clock with the following NTP server: pool.ntp.org.
N13102 Operations User Manual
Pic. 6.3
Chapter 6. SETTING: System
25