Clock setting function
This function is used to set the clock time.
To set the clock, select the "TIME SET" page from
the menu.
Holding switch (12, fig. 15) pressed in position B "▼"
for 3 seconds in this menu page gives access to the
setup mode.
When you access this function, the text "AM"
flashes; if you press switch (12, fig. 15) in position B
"▼" the text "PM" flashes; if you press switch (12,
fig. 15) in position B "▼" mode will go back to
previous setting (if it is 00:00, when toggling from
"AM" to "PM", 12:00 will be displayed).
Pressing switch (12, fig. 15) in position A "▲" gives
access to the hour setting mode; hours start to flash.
Each time you press the button in position B "▼" the
digit will increase by 1 hour; if the button is held
pressed down in position B "▼", the digit will
increase by 1 hour every second (when the button is
held pressed, the hours do not flash).
Pressing button (12, fig. 15) in position A "▲", gives
access to the minute setting mode; minutes start to
flash. Each time you press the button in position B
"▼", the digit will increase by 1 minute. If you hold
the switch down in position B "▼", the count
B = ON for 3 secs.
Flashing
B
Flashing
B
Flashing
B
Flashing
B
B
A
B
A
A
A
A
Flashing
A
Flashing
fig. 38
63