Main Maintenance Operations; Removing The Fairing - Ducati Superbike 848evo Corse Owner's Manual

Main maintenance operations

Removing the fairing

Some parts of the motorcycle fairing have to be
removed for certain maintenance or repair
operations.
Warning
If parts that have been removed are not refitted
correctly they may suddenly become loose while
riding and cause you to lose control of your
motorcycle.
Important
During reassembly always fit nylon washers
when tightening fastening screws to avoid damage
to painted parts and Plexiglas windscreen of
headlight fairing.
Side fairings
To remove the fairings, use the Allen wrench fitted
under the seat to loosen the following:
108
the two screws (1) securing the fairing panels to the
brackets;
the six screws (2) securing the fairing panels to the
headlight fairing;
the four screws (3) securing the fairing panels to the
frame;
the two screws (4) located under the fairing that join
the right fairing panel to the left fairing panel;
the two screws (5) securing the fairing panels to the
oil cooler;
the two screws (6, fig. 69) securing the front of the
fairing to the headlight fairing.
2
5
3
1
4
fig. 68