Rear turn indicators
To change the rear turn indicator bulbs, rotate the
indicator body (1) by a 1/4 turn so that the lens is up,
and then extract indicator body from the indicator
light unit.
The bulb is the banjo-type: press and rotate
counterclockwise to remove. Fit the spare bulb by
pressing and turning clockwise until it clicks. Refit the
indicator body (2) to its support and rotate it by a 1/4
turn.
Number plate light
To access the number plate light bulb, unscrew the
screw (3) securing the cover (4). Remove the bulb
and replace it.
(fig. 89)
(fig. 90)
1
2
fig. 89
4
3
fig. 90
125