Front Fork Adjusters - Ducati Superbike 848evo Corse Owner's Manual

Front fork adjusters

The front fork used on this motorcycle has rebound,
compression and spring preload adjustment.
This adjustment is done using the outer adjusters:
1) to adjust the rebound damping (fig. 60);
2) to adjust the preload of the inner springs (fig. 60);
3) to adjust the compression damping (fig. 61).
Position the motorcycle on its side stand so that it is
stable.
Turn the adjuster (1) on every fork leg top with a
suitable wrench to adjust rebound damping.
As you turn the adjusting screws (1 and 3), you will
hear them click. Each click identifies a setting. The
stiffest damping setting is obtained with the adjuster
turned fully clockwise to the "0" position. Start with
this position and turn counter-clockwise. Count the
clicks, which correspond to position 1, 2 and so forth.
94
A
1
2
fig. 60