RH switch
(fig. 48)
1) ENGINE STOP switch, two positions:
position "
" (RUN) = run;
position "
" (OFF) = stop.
Warning
This switch is mainly intended for use in
emergency cases when you need to stop the engine
quickly. After stopping the engine, take the switch
back to the "
" position to enable starting.
Important
Stopping the engine using switch (1) after riding
with the lights on and leaving the ignition key in the
ON position, may run the battery flat as the lights will
remain on.
2) Button
= engine start.
Throttle twistgrip
The twistgrip (3) on the right handlebar opens the
throttles. When released, it will spring back to the
initial position (idling speed).
84
(fig. 48)
1
2
3
fig. 48