To Replace The Imaging Unit - Oce CS193 User Manual

Replacing toner cartridges and staple cartridges and emptying punch scrap box
9.3.1

To replace the imaging unit

1
Press the [Power] (auxiliary power) key.
Check that the touch panel is turned off.
2
Open the front door, and then set the main power switch to o.
– Check that an imaging unit of the same color as the one to
be replaced has been prepared.
3
Press down to release the unlock lever of the imaging unit to
be replaced.
4
Pull the imaging unit towards you to remove it.
5
Remove the imaging unit from its packaging.
– The imaging unit can easily be damaged by light. Leave the
imaging unit in the black protective bag until immediately
before it is to be installed.
– Do not hold the top part of the imaging unit, otherwise the
PC drum may be damaged, resulting in decreased image
quality.
CS193/CS173/CS163
9
9-13