Setting The "System Auto Reset Confirmation" Function - Oce CS193 User Manual

4
– To extend the time, touch [+].
– To reduce the time, touch [-].
– Both settings can be set between 0.1 and 3.0 seconds in 0.1-second increments.
– To cancel changes to the settings, press the [Reset] key.
4
Touch [OK].
The Accessibility Setting screen appears again.
5
Touch [Close] or press the [Accessibility] key.
The Basic screen appears again.
Note
The Enlarge Display mode is compatible with basic copy, scanning and fax functions. With the Enlarge
Display mode, text and illustrations are displayed at a larger size so that they can be seen more easily.
For details, refer to the User manual – Enlarge Display Operations.
As the factory default, "Time To Start" is set to 0.8 second and "Interval" is set to 0.3 second.
4.7.4

Setting the "System Auto Reset Confirmation" function

When the system auto reset operation is performed in Enlarge Display mode, a message can be displayed,
allowing you to choose either to continue operating without exiting Enlarge Display mode or to exit Enlarge
Display mode and return to the Basic screen.
In addition, it is possible to specify the display time for the message requesting confirmation to exit Enlarge
Display mode.
Yes: Enlarge Display mode is not exited.
No: Enlarge Display mode is exited, and the Basic screen is displayed.
1
Display the Accessibility Setting screen.
– For details on displaying the Accessibility Setting screen, refer to "Displaying the Accessibility
Setting screen" on page 4-21.
For details on the automatic system reset operation, refer to "Automatically conserving energy (Sleep
mode)" on page 2-28.
4-24
Additional copy operations
CS193/CS173/CS163