12
11
Press the [Start] key.
The printed test pattern is scanned.
When the test pattern is scanned, the gradation levels are automatically adjusted based on the scanned
image.
12
Repeat steps 6 through 11 three times.
13
Touch [Close].
12.11
Header/Footer Settings
Follow the procedures described below to specify headers/footers used with the Stamp/Composition
functions available from the Application tab.
12.11.1
Specifying headers/footers
1
Display the Administrator Settings screen.
–
For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 12-37.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [Forward
The Stamp Settings screen appears.
4
Touch [1 Header/Footer Settings].
The Header/Footer Settings screen appears.
12-56
], and then touch [2 Stamp Settings].
Utility mode
CS193/CS173/CS163