Controller Data Copy - Yamaha SY85 Owner's Manual

CONTROLLER DATA COPY

This function allows the controller parameters from any other voice (the "source"
voice) to be copied to the current voice. You can copy a controller setup that is close
to the type you want, then edit it to produce the required sound.
From Voice
Range: Any INTERNAL or CARD voice
Controls: MEMORY, GROUP, PROGRAM, [CS5], [-1] [+1], Dial
Use the [INTERNAL 1], [INTERNAL 2], and [CARD] MEMORY keys to
select the memory area from which the source voice is to be selected. Use the
GROUP keys to select the source voice bank, then use the PROGRAM keys to
select the source voice number. The [CS5] slider and other data entry controls
can also be used to select the source voice number.
Once the source voice has been selected, press the [ENTER/YES] key. "Are
you sure?" will appear on the display.
Press the [ENTER/YES] key again to copy the controller data, or press
[EXIT/NO] to cancel the copy operation. Once the copy operation has finished,
"Completed!" will appear on the display briefly, then the display will return to
the controller edit mode.
6:Controller
VOICE EDIT MODE /
93