Yamaha SY85 Owner's Manual page 299

Press the [F1] key to highlight "LOAD" on the display if you want to load
data from the disk into the SY85 internal memory, or press the [F2] key to
highlight "SAVE" on the display if you want to save data from the internal
memory to the disk. Next, use [CS5] to select the number of the disk file (01
through 99) that you want to load from or save to. In the case of utilities
number 4 and 5, you also need to select the number of the song (1 through 10)
to be loaded or saved via [CS8].
Press [ENTER/YES] to begin the disk load or save procedure. If you select
"SAVE", you have the option of pressing the [F3] key to give the data file a
name before it is saved (the name is displayed above the file number — un-
named files are automatically named "--NEW--*"). If you choose the "NAME"
option, enter the file name in the normal way (see page 95) , then press [EN-
TER/YES] to begin the disk load or save procedure. The following confirma-
tion display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
disk load or save operation, or press [EXIT/NO] to cancel.
When the data has been loaded or saved, "Completed!" will appear briefly
on the display.
See page 321 for information on disk error messages.
/ DISK
UTILITY MODE
227