3: Controller Conditions - Yamaha SY85 Owner's Manual

3: CONTROLLER CONDITIONS

These parameters determine how the performance layers are affected by keyboard
aftertouch response, the modulation wheel, and the foot controller.
Use PROGRAM keys [1] through [4] (LAYER SELECT A, B, C, and D) to
select the layer to be edited.
Hold the [F1] function key ("ALL") while editing any of the following
parameters to change its value by the same amount for all layers simultane-
ously.
AT (Aftertouch)
Range: off, LyrA, LyrB, LyrC, LyrD
Controls: [CS3], [-1] [+1], Dial
The aftertouch control settings from the voice assigned to the selected layer
(LyrA, LyrB, LyrC, or LyrD) are applied to the layer being edited (i.e. the
layer selected via PROGRAM keys [1] through [4]). Select "off" to turn
aftertouch control off for the layer being edited.
MW (Modulation wheel)
Range: off, LyrA, LyrB, LyrC, LyrD
Controls: [CS4], [-1] [+1], Dial
The modulation wheel control settings from the voice assigned to the se-
lected layer (LyrA, LyrB, LyrC, or LyrD) are applied to the layer being edited
(i.e. the layer selected via PROGRAM keys [1] through [4]). Select "off" to
turn modulation wheel control off for the layer being edited.
FC (Foot controller)
Range: off, LyrA, LyrB, LyrC, LyrD
Controls: [CS6], [-1] [+1], Dial
The foot controller control settings from the voice assigned to the selected
layer (LyrA, LyrB, LyrC, or LyrD) are applied to the layer being edited (i.e.
the layer selected via PROGRAM keys [1] through [4]). Select "off" to turn
foot control off for the layer being. edited.
PERFORMANCE EDIT MODE /
31
QUICK EDIT