Yamaha SY85 Owner's Manual page 37

34
3. The Performance Mode
AN EXAMPLE
Follow these steps to create a 3-layer voice in which you play a bass voice
on the lower two octaves of the keyboard, and piano plus strings on the upper
octaves.
Although we won't use anywhere near the SY85's full complement of
performance parameters, this exercise will help you get a feel for the perform-
ance mode and standard editing procedures.
1.
Select a Performance Combination
Engage the PERFORMANCE mode and select any internal performance
combination, as described in the preceding section.
2.
Initialize the Selected Performance Combination
Make sure that the [PERFORMANCE] key indicator is lit, and then press
the SUB MODE [JOB] key. Press the PAGE
"PERFORMANCE JOB Initialize" screen.
Press the [F6] function key to ensure that the entire performance combina-
tion is initialized (the square brackets should be around "EDIT" above the [F6]
key), then press [ENTER/YES].
a few times to select the