15: Velocity Modify - Yamaha SY85 Owner's Manual

range of measures.
Meas (First & last measure numbers)
Rate (Velocity ratio)
Ofst (Offset)
198
SONG EDIT MODE /

15: VELOCITY MODIFY

Increases or decreases the velocity values of all notes in the specified track and
This job is not available when the rhythm track (track 9) is selected.
Range: 001 ... 999
Controls: [CS5], [CS6], [-1] [+1], Dial
Range: 000 ... 200
Controls: [CS7], [-1] [+1], Dial
Range: -99 ... +99
Controls: [CS8], [-1] [+1], Dial
Use the GROUP [A] through [H] keys to select the track on which the
velocity modify operation is to be performed (A = track1, B = track 2, and so
on). The LED of the selected track will glow red while the LEDs of all other
tracks containing data glow green.
Use [CS5] and [CS6] to specify the first and last measure numbers in the
range of measures over which you want to modify the velocity data. Use [CS7]
to set the "ratio" between the lower and higher velocity values (a setting of
"100%" maintains the original relationship between the notes, lower values
produce a narrower dynamic range, and higher values produce a broader dy-
namic range). Use [CS8] to specify the amount of offset ("-" settings reduce
the velocity while "+" settings increase the velocity).
Press [ENTER/YES] to begin the velocity modify procedure. The following
confirmation display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
velocity modify operation, or press [EXIT/NO] to cancel.
When the velocity data has been modified, "Completed!" will appear briefly
on the display.
SONG JOB