2: Volume - Yamaha SY85 Owner's Manual

2: VOLUME

For optimum balance between the voices in a performance combination, this
screen allows the volume of each voice to be adjusted individually.
The name of the currently selected voice/layer is shown in the upper right
corner of the display. The characters "ABCD" to the right of the voice name
indicate the status of each voice: a capital letter if the voice is on, a lower-case
letter if the voice is muted, and a dash if the voice is off.
Volume
Range: 0 ... 127
Controls: [CS2], [CS4], [CS6], [CS8], [-1] [+1], Dial
Use the [CS2], [CS4], [CS6], and [CS8] sliders to adjust the volume levels
of the A, B, C, and D layer voices, respectively. A setting of "0" produces no
sound, while a setting of "127" produces maximum volume. The vertical bar
graphs next to each parameter provide a visual indication of volume levels —
the longer the bar the higher the volume. Voices that are turned off are indi-
cated by "----" on the display.
PERFORMANCE EDIT MODE /
1:Layer 15