Sample Dump - Yamaha SY85 Owner's Manual

MIDI device. Both the MIDI IN and OUT terminals must be connected to the exter-
nal MIDI device, since the SY85 transmits a sample dump request message to initiate
transmission by the external device.
Sample
To
248
WAVE EDIT MODE
1: SAMPLE DUMP RECEIVE
This function initiates reception of MIDI Sample Dump data from an external
Range: 00 . . . 99
Controls: [CS3], [-1] [+1], Dial
Range: Volatile, Non-vol.
Controls: [CS7], [-1] [+1], Dial
Use [CS3] to select the number of the sample to be received from the
transmitting device, and [CS7] to select the type of memory in which the data
is to be stored (see "Wave Memory Expansion" on page 285 for additional
information about the memory types).
When ready to receive the data, press the [ENTER/YES] key. This initiates
transmission of a sample dump request message, then the SY85 waits for the
sample dump data. The received data is appended to the sample data previously
residing in the SY85 memory.
The [EXIT/NO] key can be used to cancel reception at any time.
/ MIDI SAMPLE DUMP