Wave Initialize - Yamaha SY85 Owner's Manual

WAVE INITIALIZE

This function erases and initializes all wave memory, the specified type of wave
memory, or a single specified sample.
Mem (Memory type)
Range: Volatile, Non-vol., all
Controls: [CS2], [-1] [+1], Dial
Use [CS2] to select either the volatile wave memory ("Volatile Mem."),
non-volatile wave memory (Non-vol. Mem."), or all wave memory to be
cleared.
See "Wave Memory Expansion" on page 285 for additional information.
Wave Mem Allocation
Range: 0 . . . 63, off
Controls: [CS8], [-1] [+1], Dial
All numbers from the number specified here to 63 are allocated for use as
non-volatile waveform and sample numbers.
Press [ENTER/YES] to begin the wave initialize procedure. The following
confirmation display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
initialize operation, or press [EXIT/NO] to cancel.
When the specified wave memory has been initialized, "Completed!" will
appear briefly on the display.
/ INITIALIZE
WAVE EDIT MODE
247