2: Key Send Select & Level - Yamaha SY85 Owner's Manual

2: KEY SEND SELECT & LEVEL
The parameters provided here determine to which of the SY85 effect stages the
output from each drum key is sent, and at what level. It is also possible to control
the effect send level via keyboard dynamics.
Key
Range: C1 ... C5
Controls: [CS2], [-1] [+1], Dial, Keyboard
Selects the drum key (C1 ... C5) for which the send select and level param-
eters are to be adjusted. Use either the [CS2] slider or the keyboard to enter
the key number.
Switch 1a, 1b/2a, 2b
Range: See text below
Controls: [CS5]/[CS6], [-1] [+1], Dial
Determines to which of the EFFECT 1 and EFFECT 2 effect, stages the
output from the current layer is sent. Each time the [F5] or [F6] function key is
pressed, the cursor alternately moves to the corresponding "a" or "b" parameter.
The [-1] and [+1] keys can then be used to turn the stage on ("a" or "b") or
off ("."). The [CS5] and [CS6] sliders select the following settings in sequence:
CS5 (EFFECT 1)
1 ./. (a and b off)
1a/. (a on, b off)
1a/b (a and b on)
1./b (a off, b on)
If a "single" type effect is selected then only stage "a" can be selected. If a
"cascade" type effect is selected, then only stage "b" can be selected. If a
"dual" type effect is selected, then both stages "a" and "b" can be selected. An
effect stage that cannot be selected is represented by "-" on the display.
CS6 (EFFECT 2)
2./. (a and b off)
2a/. (a on, b off)
2a/b (a and b on)
2./b (a off, b on)
DRUM VOICE EDIT MODE /
129
EFFECT EDIT