Filter Data Copy - Yamaha SY85 Owner's Manual

FILTER DATA COPY

This function facilitates voice editing by allowing the filter parameters from any
other voice (the "source" voice) to be copied to the current voice. You can copy a
filter setup that is close to the type you want, then edit it to produce the required
sound.
From Voice
Range: Any INTERNAL or CARD voice
Controls: MEMORY, GROUP, PROGRAM, [CS5], [-1] [+1], Dial
Use the [INTERNAL 1], [INTERNAL 2], and [CARD] MEMORY keys to
select the memory area from which the source voice is to be selected. Use the
GROUP keys to select the source voice bank, then use the PROGRAM keys to
select the source voice number. The [CS5] slider and other data entry controls
can also be used to select the source voice number.
Once the source voice has been selected, press the [ENTER/YES] key. "Are
you sure?" will appear on the display.
Press the [ENTER/YES] key again to copy the filter data, or press [EXIT/
NO] to cancel the copy operation. Once the copy operation has finished, "Com-
pleted!" will appear on the display briefly, then the display will return to the
filter edit mode.
3:Filter
VOICE EDIT MODE /
73