3: Pan - Yamaha SY85 Owner's Manual

from different voices at different locations in the stereo sound field. The parameters
in this screen determine the position in the stereo sound field in which the sound
from each active voice will be heard (left to right).
Pan
150
SONG EDIT MODE
In a multi setup, interesting stereo effects can be produced by placing the output
Range: -31 ... +31, vce
Controls: [SHIFT] +
Only eight voice numbers are shown on the display at one time. Use the
PAGE and
multi instruments "1 ... 8" and "9 ... 16". The currenty selected group of
voices is indicated on the upper display line.
Use the [CS1] through [CS8] sliders to adjust the pan positions of voices 1
through 8 or 9 through 16, respectively. The name of the currently selected
voice is shown in the upper right corner of the display. Voices that are turned
off are indicated by "---" on the display. Minus values represent panning to the
left, and positive values represent panning to the right. "0" positions the sound
of the selected layer in the center of the stereo sound field. The next setting
above "+31" is "vce." When "vce" is selected the preset pan position for the
selected voice or performance combination is used. The upper line of the dis-
play also shows a graphic representation of the stereo sound field with "L"
representing '"left" and "R" representing "right." As you change the pan value
the vertical bar will appear at the corresponding position on the graphic dis-
play.
/ MULTI EDIT

3: PAN

[CS1] ... [CS8], [-1] [+1], Dial
keys while holding the [SHIFT] key to switch between