Yamaha SY85 Owner's Manual page 405

1. Synthesizer mode
1.1 MIDI reception/transmission block diagram
<MIDI reception condition> 1/2
R ch — Voice Receive ch.
<MIDI reception condition> 2/2
<MIDI Transmission condition>
1. 2 Channel message
1.2.1 Transmission
1.2.1.1 Note Off
Transmission note range
Velocity range = 1...127
1.2.1.2 Note On
Transmission note range
Velocity range
1.2.1.3 Control change
Control change is output to MIDI when the following controllers arc operated.
ctrl#
1 Modulation wheel
4 Foot contro
Volume pedal
7
Sustain switch
64
16~19 CS
1.2.1.4 Program bank change
Program bank change is transmitted, when a voice is selected in voice mode, when a performance is
selected in performance mode.
Program bank change No. is assigned as shown below in accordance with the mode.
Bn 00 xx 20 xx
Internal 1 Voice
InternaI2 Voice
Internal3 Voice
Internal4 Voice
Card1 Voice
Card2 Voice
Card3 Voice
Card4 Voice
Internal1 Performance
Internal2 Performance
Card1 Performance
Card2 Performance
Internal1 Voice(multi)
Internal2 Voice(multi)
Internal3 Voicc(mulli)
InlcmaM Voice(multi)
Card1 Voice(multi)
1
= C1(36)...C6(96)
= C1(36)...C6(96)
= 1...127
parameter
datarng
0 ~ 127
10 ~ 127
0~ 127
0~127
0 ~ 127
Data
00,00
00,03
00,06
00,09
00,01
00,04
00,07
00,10
00,64
00,67
00,65
00.68
00,32
00.35
00,38
00,41
00.33