Replacing The Push Handles: Standard / Folding Version; Replacing The Push Handles: Height-Adjustable Version - Otto Bock BRAVO Racer Service Manual

4.4.3 Replacing the push handles: Standard / folding version

First remove the back upholstery flap. Open the strap that covers the push handle screw con-
nections and pull it off towards the bottom (Figure 60).
If applicable, remove the upper upholstery strap (in case of folding push handles). Loosen the
push handle screw connections on the rear of the back tubes (Figure 6) and pull the push
handles up and out / off the back tubes.
Replace the push handles with the desired version or with new parts.
For assembly, please proceed in reverse order.

4.4.4 Replacing the push handles: Height-adjustable version

First remove the back upholstery flap (Figure 6). Loosen and remove the outer screws from the
clamps, and remove the strap (Figure 6).
Loosen the four screws on the inside of the clamps (Figure 64) and remove them. Pull the push
handles up and out of the back tubes.
Replace the push handles with the desired version or with new parts.
For assembly, please proceed in reverse order.
4
58
60
5
6