Table of Contents
Advertisement
Appendix
Specifications
Video input
Number/signal type ................... 1 RGBHV, RGBS, RGsB, component video with 1 buffered loop-through
Connectors ................................... 2 x 5 BNC female (5 BNCs for RGB/component video input, 5 BNCs for
Nominal level ............................... 0.7 Vp-p for RGB
Minimum/maximum levels ....... 0 V to 2.0 Vp-p with no offset at unity gain
Impedance .................................... 75 ohms
Horizontal frequency .................. Autoscan 24 kHz to 100 kHz
Vertical frequency ....................... Autoscan 50 Hz to 120 Hz
Resolution range .......................... Autoscan 560 x 384 to 1600 x 1200
DC offset (max. allowable) ......... 2.0 V
External sync (genlock) ............... 0.3 V to 1.0 Vp-p
Video processing
Encoder ......................................... 10 bit digital
Digital sampling ........................... 24 bit, 8 bits per color
Colors ............................................ 16.8 million
Horizontal filtering ...................... 8 levels
Flicker filtering ............................. 4 levels
Encoder filtering .......................... 4 levels
Video output
Number/signal type ................... 1 RGBHV, RGBS, RGsB, or component video
Connectors ................................... 5 BNC female: RGBHV/RGBS/RGsB/component video
Nominal level ............................... 0.7 Vp-p for RGB
Minimum/maximum levels ....... 0.0 V to 1.0 Vp-p
Impedance .................................... 75 ohms
Sync
Input type ..................................... Autodetect RGBHV, RGBS, RGsB
Output type .................................. RGBHV, RGBS, RGsB
Genlock connectors ..................... 1 BNC female: genlock input
Standards ...................................... NTSC 3.58, PAL
Input level ..................................... 1.5 V to 5.0 Vp-p
Output level .................................. TTL: 5.0 Vp-p, unterminated
Input impedance .......................... 600 ohms
Output impedance ....................... 75 ohms
Max input voltage ........................ 5.0 Vp-p
Polarity .......................................... Negative
A-2
VSC 900/900D • Appendix
1 RGBHV, RGBS, RGsB with 1 buffered loop-through
RGB/component video loop-through)
(1) 15-pin HD female for RGB input, (1) 15-pin HD female for buffered RGB
loop-through (RGB)
1 SDI component video (SMPTE 259M-C, VSC 900D only)
1 S-video
1 NTSC/PAL composite video
1 BNC female: SDI component video (VSC 900D only)
(1) 4-pin mini-DIN female: S-video
1 BNC female: composite video
1 BNC female: genlock output (terminate w/75 ohms if unused)
Advertisement
Table of Contents
