Extron electronics VSC 900 User Manual page 35

Command/response table for SIS commands (continued)
Command
(host to scan converter)
Flicker filter
Set a specific filter value
Increment up
Increment down
View the filter level
Test pattern
Set a specific test pattern
View the test pattern
Freeze
Enable
Disable
View the freeze status
Example:
Executive mode
Enable (lock image adjustments)
Disable
View the executive mode status
Example:
Zap (reset to default settings)
Total reset
Query firmware version
Query firmware version number
Request part number
Request VSC 900 part number
Request VSC 900D part number
Request information
Display information
ASCII Command Response
(scan converter to host)
d Dvz
X13
+d Dvz
-d Dvz
d
J Tst
X12
J
1F Frz1
0F Frz0
F Frz
F Frz0
1X Exe1
0X Exe0
X Exe
X Exe0
zXXX ZapXXX
Esc
Q/q x.xx
N/n 60-478-01
N/nI 60-478-02
I/i Chn
X5
Additional description
Set the vertical detail level.
X13
Increase vertical detail.
X13
Decrease vertical detail.
X13
Show the vertical detail level.
X13
Set the test pattern.
X12
Show the current test pattern.
X12
Output a "frozen" video image.
Turn off freeze (output motion).
Show the freeze status.
X2
Lock front panel adjustments;
adjust image via RS-232 only.
Adjustments & selections can
be made from the front panel.
Show executive mode status.
X2
Reset everything: all settings,
and adjustments to the factory
default.
Show the firmware version.
Show the VSC 900's part #.
Show the VSC 900D's part #.
• Hrt • Vrt Show input source, horizontal
X1 X1
and vertical frequencies.
VSC 900/900D • Serial Communication
(Continued)
3-5