341
TIE Modify Removed Digit / Added Dial
Description
Selection
Default
Programming
Conditions
42
System Programming
Assigns the removed digits and added numbers of a received TIE
call. Digits are removed and added from the beginning of the
dialed digits.
• Location number: 01 through 32
• Number of digits to be deleted: 0 to 4 (0=no deletion)
• Number to be added: 4 digits (max.)
All locations – Deleted digit: 0, Added Dial: Blank
1.
Enter 341.
Display: TIE Remove/Add
2.
Press NEXT.
Display: Location NO?→
3.
Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:0,
4.
Enter the number of digits to be deleted.
To change the current entry, press CLEAR and enter the new number.
5.
Press
to program the number to be added.
6.
Enter the number to be added.
To change the current entry, press CLEAR and enter the new number.
7.
Press STORE.
8.
To program another location, press NEXT or PREV, or
SELECT and the desired location number.
9.
Repeat steps 4 through 8.
10.
Press END.
Each added number has a maximum of 4 digits, consisting of 0 through
9.