Tie Security Type - Panasonic KX-TD816CE Installation Manual

440
Description
Selection
Default
Programming
Conditions
52
System Programming

TIE Security Type

Assigns the security mode for TIE calls. There are two modes, Non
Security and Trunk Security (CO line security). Non Security
mode allows the caller to access a CO line without dialing a TIE
user code. Trunk Security mode requires the caller to enter a TIE
User Code assigned in program [811] "DISA / TIE User Codes"
before making a TIE call.
• CO line group (TRG) number: 1 through 8,
• Non (non security) / Trunk (trunk security)
Non
1. Enter 440
Display: TIE Security
2. Press NEXT.
Display: TRK GRP NO?→
3. Enter a CO line group number.
To enter CO line group number 1, you can also press NEXT.
Display example: TRG1:Non
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. Press END.
To assign all CO line groups to the same selection, press the
step 3. In this case, the display shows the contents programmed for CO
line group number 1.
( =all CO line groups)
key in