E&M Signal Assignment - Panasonic KX-TD816CE Installation Manual

4.2 System Programming
Description
Selection
Default
Programming
Conditions
E&M Signal Assignment
Assigns the E&M signal. There are three signals available:
Continuous: Continuous E&M (Wink/Immediate)
Pulsed Ans: Pulsed E&M with Answer Signal (Wink only)
Pulsed No Ans: Pulsed E&M without Answer Signal (Wink only)
Continuous / Pulsed Ans / Pulsed No Ans
Continuous
1. Enter 129.
Display: E&M Signal
2. Press NEXT.
Display example:Continuous
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
• If you select "Pulsed Ans" or "Pulsed No Ans", you must select "Wink"
as the start type.
129
37