S
Connection References
Programming References
Feature References
Operation References
64
• This system can store information on up to 100 calls. If more calls are
originated or received, previous records are deleted starting from the
oldest one.
• This data is not deleted when you reset the system.
• If the system clock is not set by System Programming or if the calendar
IC is out of order, the date and time is not printed out.
• If FLASH Signal is manually sent out during a conversation, the call
record is printed and a new record is started.
Section 2, Installation
2.3.10 Printer Connection
Section 4, System Programming,
[000] Date and Time Set
[120] Charge Display Selection – in this manual
[212] Call Duration Count Start Time
[800] SMDR Incoming / Outgoing Call Log Printout
[801] SMDR Format
[802] System Data Printout
[806]–[807] EIA (RS-232C) Parameters
[815] SMDR Out put Mode – in this manual
[990] System Additional Information, Field (38)
None
Not applicable.
3
Features