Panasonic KX-TD816CE Installation Manual page 19

3 Features
Conditions
Programming References
• It is possible to program the E&M signal, voice path type and voice
level (transmit / receive) of the E&M Line Unit by system
programming. For details about the E&M signal, voice path type and
voice level, refer to "Installation" in this manual.
• The FLASH button does not function as the disconnection key.
• The ability to perform Call Forwarding/Call Transfer to TIE line is
determined on a Class of Service basis. See programs [503] and [504].
Section 4, System Programming
[100] Flexible Numbering
[109] Expansion Unit Type
[128] PBX Code
[129] E&M Signal Assignment
[220] TIE First / Inter Digit Time
[340] TIE Line Routing Table
[341] TIE Modify Removed / Added Digit
[431] TIE Table Number Assignment
[432] TIE Incoming Assignment
[433] TIE Outgoing Assignment
[434] TIE Subscriber Number Removed Digit
[435] TIE Added Number
[436] TIE Wink Time Out Assignment
[437] CO-to-TIE Transfer
[438] TIE-to-CO Transfer
[439] TIE-to-TIE Transfer
[440] TIE Security Type
[441] Line Hunt Sequence
[442] Voice Path Type
[443] Voice Level (Transmit)
[444] Voice Level (Receive)
[445] TIE Receive Dial
[503] Call Transfer to CO Line
[504] Call Forwarding to CO Line
[811] DISA / TIE User Codes
[990] System Additional Information, Field (41)
E
19